Portable Aluminum Wheelchair Ramp Manufacturer & Supplier

1.The first step is to ensure all debris, including mud, dust, and leaves, is cleared off the ramp. To do this, you must start at the top of the ramp with a stiff-bristled push-broom and sweep all the debris down the ramp; the edge guards that run along both edges of the ramp prevent the debris from being pushed over the sides. The stiff-bristled push-broom is recommended to clean out the grooves of the ramp, but don’t try to scrub the ramp with the broom as it might scratch the aluminum.

2.After brushing off the aluminum ramp, rinse it with water and a mild detergent such as dish soap. Use a generous amount of dish soap over the length of the ramp, and put a concentrated amount on tough spots. Let it sit for a couple of minutes. Next, hose off or lightly pressure wash the ramp to remove the soap and dirt. If possible, it is suggested to use filtered water because unfiltered water may contain sulfur, chlorine, fluoride, and other minerals that could damage the aluminum over time. Ensure all dish soap is washed off before the wheelchair ramp is used.

3.If there is dirt on the ramp still, use a towel and dish soap to scrub the area. Do not use steel wool or scouring pads because these materials can scratch the aluminum and give it a dull appearance. Do not use harsh cleaners like baking soda or alkali-based cleaners, as these can cause discoloration. If you want to try a new type of cleaner, test an area on the underside of the ramp to see if it discolors the aluminum.

4.If the wheelchair ramp has already oxidized, try spot-treating the oxidized areas with an aluminum cleaner.